- Bed in Chesterfield style
- While in a "K" – Beach House Ashton McDougall of Australia
- Classic rugs and chandelier filigree
- Black linen with decorative yellow
- Prefabricated Wood and Glass House in the forest
- Brown leather sofa in living room with fireplace
- This modern luxury – Six Ramsgate
- Children wooden furniture
- wall design for fans of cartoons
- Flat roof house with yard – contemporary architecture solutions from India
Ask flowers tower itself – the decor bulky garden and terrace
This project is simple: a beautiful and compact idea, which would add an unusual touch to any garden and terrace Visit our picture tutorial and learn how you can make this amazing beautiful flowers tower itself ..
1m cable with 5 x 10 cm openings
large vase of flowers
Decoration for garden and terrace - step by step guide
Step 1 in the form of a cylinder of wire netting. Wear gloves when handling the closing to avoid injury from sharp edges. You can use a slightly smaller pot as a guide. Make sure that the shape with the inner diameter of the flower pot, is used as the base.
Flower Shape Tour - decoration for garden and terrace
Step 2 Overlap the two ends of the wire mesh and secure with cable ties. Use the links above to be quite firm and stable when filled. Ensure that the cylinder fits over pots of flowers selected. If you want to reduce the height, just use scissors.
Step 3 Wrap the gauze around the garden mesh, to measure how much you need. Cut the fabric with scissors, then push the tower. Smooth the fabric along the inside of the tower. Cut off the excess fabric from the top of the tower, so that there is an overlap of 5 cm in the upper part of the tower.
Step 4 Use to make small incisions in the tissue just under the edge of metal to make a knife. Cut the two layers of fabric. Cut each third wire mesh. Then run cable ties through the slots and secure the wire.
Step 5 Fill 1/3 of the tower with flower potting soil. Add water and then with two thirds of the earth, water again with water.
Step 6 Use a garden shovel to fill the gap around the turn of the flower. Cut flowers of the tower to create a vertical and a horizontal section in one of the top right is a hole in the shape of "+". You plant the flower. Let the bottom line just above the ground without holes. Thus, the plant will form a cascade over the edge of the container.
Step 7 Now is the time to plant your flowers. With you finger holes behind the fabric, in the openings. Gently push the plant or seed in this space. It should be snug, but do not force it.
Step 8 Adjust with some plants to complete the top of the tower looks.
Another version of this idea
Performance in a small pot