- Living space in the attic
- Riders Analysis
- Rosa Wall
- 100 ideas integrate aquarium designs in the wall or in the living room
- Chandelier and gold frames
- Modern sofa in gray
- Tinker Frühlingsdeko – 25 ideas to make their own eggshells
- How to disguise an open closet in a room.
- 14 interesting and creative computer table designs do it yourself
How to build a garden pond low maintenance itself in 7 Steps
Find out how you can easily build a small pond maintenance himself in a couple of passages garden. Whether you have a little 'space in the garden, set up a small pond with a mini waterfall and enjoy the soothing sound of flowing water.
Light maintenance garden pond build it yourself - use materials
This allows you to build a garden pond on your own, you will need the following documents: pond marine environment, protection, water pump, shaft tube, sand, gravel, pebbles, pond scum, crimp band and the T-junction.
Garden pond build it yourself - Step 1: Search for professional advice
If you want to build a garden pond itself, the preparation is very important. Let us first consider where you want to build the size and depth of the pond, which will be, and other important details. It would be better if you start with a professional consultation cable and carefully analyze the situation before the initial construction.
Step 2: Create the database
In the same building garden ponds is the foundation is of great importance. It 'important to choose the pond liner for your garden pond base. Check carefully if the film is not waterproof. The loss is based on a defect that occurs most often in the garden pond.
Step 3: The film protects and always
The pond liner should be well protected against sharp stones and other objects. If you connect the movie to the brim with heavy stones, still make a backing of textile fabrics, which will protect the stones of the cinema.
Place the water pump properly: Step 4
If you create the pond itself, and you have opted for a water pump, have no case on the ground. Sets at first a stone or brick and put the pump If you also set a small waterfall, set the pump so far away from it as possible. Then you leave a small space between the stones on the board to hide the pipe between tree.
Step 5: Create a dike
And 'particularly important if you build a garden pond itself sets a dam around it. Rain water that can flow into the lake could cause a lot of damage in the pond. As a possible solution, we build a dam around the pond, so that you can keep rainwater pond.
Step 6: Easy to drain the pond water
So you can easily empty the pond, you must install a connection in wave-shaped tube T. In this way, you can easily drain the water as you want to clean the pond.
Step 7: Use a permanent tube
While you are sure that you can easily fill the water tank and can easily drain the pond, the exhaust pipe is particularly important. Buy quality materials and invest now rather avoid additional costs for repairs later. A traveling wave tube is always a good choice because it is more flexible.
Garden Pond next to the bridge
Pond built in wooden veranda
garden pond triangular
Pond with the edge of the stone
pond with water lilies
Pond as a decoration in the garden